A visit covers the diagnosis, the repair or installation, and a confirmation that everything is working before we leave. That is what you get when you call: someone who scopes the job on the phone, gives you a price before anything is scheduled, and shows up ready to handle the work. We take residential calls, commercial calls, and managed-property calls across Grayslake and the surrounding area. Working here means getting your plumbing right the first visit.
We handle drain cleaning and clog removal, leak detection and repair, water heater service and replacement, sewer and main line work, fixture installation, gas line repair, repiping, and emergency calls when something goes wrong fast. For the full list of what a visit covers, the services page has the detail. This page covers what matters most if you are in Grayslake and need plumbing work taken care of.
We answer the phone. We get the visit booked. We keep it simple.
We are available every day from 8:00 AM to 8:00 PM, including weekends. When you call, the job gets scoped on the phone before anything is put on the calendar. You get the rate confirmed before the visit is booked, and you know what is covered before anyone arrives. Prompt response, even for last-minute plumbing calls, is part of how we operate.
For a problem that cannot wait, call and describe what is happening. We work through the situation on the phone, confirm what the visit covers, and get it on the schedule. A burst pipe, a major leak, or a water heater that has stopped working are the kinds of calls we take short-notice.
For a rental unit or a business that needs to stay open during the work, mention that when you call. Access arrangements, tenant schedules, and commercial operating hours all get factored into how the visit is set up. The scope and the timing are worked out on the call so the visit runs without disruption.
A damp ceiling or a water stain on the floor is rarely sitting directly above or below the leak. Water follows the path of least resistance through framing and insulation before it shows up somewhere visible. By the time the stain appears, the source may be several feet away in any direction. Opening the wrong section of wall or slab wastes time and adds cost without solving anything.
We use pressure testing and electronic detection methods to locate a leak before anything is opened up. Pressure testing isolates which section of the supply system is losing pressure. Electronic detection narrows the location within that section. That sequence means the repair is made at the right spot the first time.
A supply line running beneath a concrete slab can develop a pinhole leak that goes unnoticed for a long time. The signs are often indirect: a drop in pressure, a water bill that has climbed without explanation, or a warm spot on the floor above a hot-water line. A slab leak needs to be located precisely before any concrete is disturbed, and that is what the detection step is for. Once the source is confirmed, the repair options are explained and the price is settled before any work begins.
Landlords and property managers in Grayslake run into a specific set of complications when a plumbing problem comes up at a unit. The tenant is home, or is not. Access has to be coordinated. The invoice needs to go to the right account. The repair has to be done without turning a small problem into a disrupted tenancy.
When you call about a managed property, tell us what the access situation looks like and who needs to be notified. We work out the schedule around the tenant's availability, confirm the scope and price with the property owner or manager, and handle the visit so the tenant is not left waiting without information. The invoice goes where you tell us it goes.
For a landlord managing several units, we can take calls across multiple addresses and coordinate the scheduling so repairs do not stack up into a single overwhelming day.
Call (224) 445-9789 and we will work out what the schedule allows.
A refrigerator with a water dispenser or an ice maker runs off a small supply line that connects to the household cold-water supply. When that line develops a slow drip at the connection point, or when the fitting behind the appliance begins to weep, the water tends to collect out of sight until the floor or the cabinet shows the damage. We replace the line, reseat the fitting, and confirm the connection is dry before we leave.
A pipe that has split under pressure or expanded past its limit needs to be addressed immediately. The first step is getting the water off at the shutoff valve closest to the break. If that valve has seized or is not holding, the main shutoff is the next stop. We handle the repair to the damaged section and check the shutoff valve condition as part of the visit. A shutoff valve replacement gets done at the same time if the valve is no longer reliable.
A drain that is running slowly is usually carrying a partial blockage somewhere in the line. A drain that has stopped entirely is a different situation and often points to a more complete obstruction. We clear clogs at the fixture level and further down the line where the blockage has moved past where a standard snake can reach. For grease buildup, scale, or debris that has accumulated over time, hydro jetting clears the line in a way that keeps it clear longer.
A toilet that rocks, leaks at the base, or has a wax ring that has failed is not just a nuisance. Water seeping under the base damages the subfloor and the framing below it, sometimes for a long time before anyone notices. We reseat the toilet with a new wax ring, check the flange condition, and confirm the seal is sound. When the toilet itself is the problem, we handle the replacement and the connection to the drain and supply lines.
The gas line that feeds a water heater, a range, or an outdoor connection is plumbing work. A line that needs to be extended for a new appliance, a fitting that is showing signs of wear, or a connection that is not sealing correctly are all calls we take. If you smell gas, leave the building and call from outside. Once the situation is safe, we locate the problem, make the repair, and confirm the line is sound before it is back in service.
A single fixture that drains slowly usually points to a blockage close to that fixture, in the trap or the branch line serving it. Hair, soap buildup, and food debris are the common causes, and clearing them is a straightforward job.
When multiple fixtures in the same building start draining slowly at the same time, or when a toilet gurgles while a nearby sink is running, the problem is further down the system. That pattern points to the main sewer line rather than any individual branch. A main line blockage can come from grease accumulation, a foreign object, root intrusion, or a section of pipe that has shifted or collapsed.
The distinction matters because the right tool and the right access point are different for each. A fixture-level clog and a main line obstruction both get resolved, but not the same way. We identify which one you are dealing with on the call before we arrive, so the visit is set up correctly from the start.
Your time matters, so we keep the plumbing job moving, and that starts with a price that is explained before anything is scheduled.
When you call, we work through the scope of the job with you on the phone. The price is confirmed once the job is scoped, and you get a plain answer when you ask what it covers. The fault itself and what has to come apart to reach it are the things that move a price from one job to the next. A drain cleaning on a single fixture is a different scope from clearing a main line or repairing a section of sewer pipe. We do not quote a flat number for every call because the right number depends on what the job actually involves.
If the situation on-site turns out to involve more than what was described on the call, we explain what changed and confirm the updated price before any additional work starts. Clear communication from the first call to the final test is how every job runs.
We serve Grayslake and the communities nearby throughout Lake County. The towns we cover regularly include:
If you are in this part of Lake County and need a plumber, call (224) 445-9789 and we will confirm service at your address on the call.
We answer when you call. We explain the work. We leave it dry.
A sump pump that runs more than usual during heavy rain is doing its job, but one that cycles constantly in dry weather or cannot keep the pit level down during a storm is telling you something is wrong. Before you call, check whether the float switch is stuck in the on position, which can cause constant cycling without any real water movement. Beyond that, the pump sizing, the discharge line routing, and the condition of the check valve all affect how well the system performs.
Call (224) 445-9789 and describe what the pump is doing and we will work out whether the visit is a repair, a replacement, or a discharge line issue.
It is one of the clearest signs of an active leak somewhere in the supply system. The movement tells you water is flowing even though no fixture is open, which points to a pipe, a fitting, or a connection that is losing water somewhere between the meter and the fixtures. Call us and we will schedule a leak detection visit to locate the source.
Not typically. Call and describe the access situation when you book, including any gate codes, road conditions, or directions that are not obvious from the address. We will confirm the visit and note the access details so the visit goes smoothly.
That is determined by whoever books the job. If a landlord or property manager calls and sets up the visit, the invoice goes to them. If a tenant calls on their own, the billing goes to the tenant unless the owner contacts us directly to arrange otherwise. Settle the billing question before the visit and let us know on the call so the invoice goes to the right person from the start.
Root intrusion is a common problem in mature neighborhoods across Lake County, where established trees follow moisture into sewer lines through small cracks or loose joints. The early signs are easy to miss: a drain that is slightly slower than it used to be, a toilet that gurgles when a nearby fixture runs, or a recurring clog that clears and then comes back within a few weeks. Catching it early means a cleaning and an inspection rather than a full line replacement. Call and describe what you are noticing and we will work through the likely cause on the phone.
Yes. Before we leave, the repaired or installed section is tested to confirm it is holding and functioning correctly. That applies to supply line repairs, water heater installations, fixture installs, and any other work that involves a pressurized connection. You should see the system operating normally before the visit closes out.
Guessing at a plumbing problem off the internet costs time and sometimes makes the situation worse before anyone has looked at it.
Call (224) 445-9789 and describe what is happening.
We scope the job on the phone, give you the price before anything is scheduled, and get the visit on the calendar. That is how every call through Antioch Plumbing Company runs, from the first question to the final test.
Call (224) 445-9789 and get a straight answer on the call.
You can browse our town-by-town list. Drain and sewer work covers these nearby towns as well: Round Lake, Round Lake Beach, Mundelein.
From a dripping faucet to a burst pipe, we handle the full range of plumbing repair and installation work in Grayslake and across Lake County. Call with what you are noticing and we work through the scope on the phone before anything is scheduled. You get a clear rate up front and know what the visit covers before we arrive. The table below outlines what each service includes and who it fits best.
| Type of Job | What's Included | Typical Situations | Things to Keep in Mind |
|---|---|---|---|
| Emergency Plumbing | Burst pipe response, Major leak containment and repair, Emergency water heater service, Scheduling arranged as quickly as the situation allows | Any situation where waiting until the next business day would cause significant water damage | We take emergency calls every day from 8:00 AM to 8:00 PM, including weekends |
| Faucet & Fixture Installation | Faucet repair and replacement, Showerhead and tub fixture work, Kitchen and bathroom fixture installation, Supply and drain connection | Remodels, fixture upgrades, or a dripping faucet that repair alone cannot fix | A dripping faucet adds up on the water bill month after month and is usually a straightforward fix on the first visit |
| Water Heater Repair & Replacement | Tank and tankless unit diagnosis, Element and thermostat repair, Full unit replacement and sizing, Gas and electric connections | Households or businesses with no hot water, inconsistent temperature, or an aging unit | Sediment buildup from Lake County's hard water is a common cause of reduced capacity and heating problems in tank units |
Call (224) 445-9789 and describe what you are dealing with. We work through the scope on the phone, give you a clear rate before anything is scheduled, and get the visit on the calendar.
(224) 445-9789